Portable Rockwell Hardness Tester PHR-4-2

Detailed Product Description

Introduction

 

The Portable Small Rockwell Hardness Tester is designed on the basic principle of Rockwell hardness testing. The testing principle and accuracy comply with ISO6508 and ASTM E110. Tested by China National Metrology Institute with the error less than 1.5HRC, same as the bench type tester.

Miniaturization of Rockwell hardness tester, the smallest model weighs only 0.8kg and the operation is similar to that of a micrometer.

The indentations made by this Rockwell hardness tester are small, which can be used to test the work pieces directly as a non-destructive test.

APPLICATION: The tester can be used to test piece by piece the finished and semi-finished work pieces produced in batch at production sites, sales fields and finished product warehouses. They are also suitable for testing many kinds of thin, small,long and irregular parts that can not be tested by the bench type.

TEST SCOPE: from very soft metals like aluminum, lead and tin; medium hard aluminum alloy, copper, copper alloy, soft steel and stainless steel; to very hard alloy steels, carburizing steels and carbides etc., covering almost all common metals.

Traceable standard hardness block

 

Main Technical Parameters

Initial Test Force:	10 kg
Total Test Force:	60 kg, 100 kg or 150 kg
Indenter:	120°diamond cone
	1.588mm carbide ball
Force Applying Method:	by screw
Testing Range:	Rockwell hardness HRC, HRB, HRA,etc.15 scales.
Accuracy:	Meets requirements of ISO6508
Resolution:	0.5HR
Application:	All metals, including steel, casr iron,
	alloy, titanium alloy, copper and copper alloy,aluminum and aluminum alloy and carbides etc.

 

Standard Package

1 Tester 1 Bench stand 1 Diamond indenter (120°cone) 2 Ball indenters (Φ 1.588mm) 1 Flat anvil 1 V anvil 3 Standard Rockwell hardness blocks 1-2 Extensions 1 Carrying case

 

Optional

 

120°diamond cone indenter

Carbide ball indenter (1.588mm, 3.175mm)

Steel ball indenter (6.35mm, 12.7mm)

Standard test blocks (HRA, HRC-High, HRC-Medium, HRC-Low, HRB)

Raised spot anvil

Slim raised spot anvil (for small supporting surface workpieces)

Concave cylindrical anvil

Convex cylindrical anvil (for tubing,

curved sheets)

Anvil for testing ball (for steel ball)

Spare magnifier

 

Model Selection

 

Model	Opening Size (W×D)	Net Weight (kg)	Package Weight (kg)	Package Dimensions (mm)
PHR-1	25mm×25mm	0.7	2.8	325×240×140
PHR-2	50mm×50mm	1.2	3.7	390×280×160
PHR-4-2	100mm×50mm	1.5	5.2	510×375×177
PHR-4-4	100mm×100mm	2.5	6.1	510×375×177
Bench Stand(standard accessory)		4.6	4.9	215×148×232

Remarks: The first number in the model specification means the opening width(inch), the second number means the opening depth(inch), if only one number it means the width and depth are the same value.